i-System Implants: Implants
Bone-level short implants from 4 mm with a 1.5° locking conical connection, sloping shoulder and fin-type body — 2.0, 2.5 and 3.0 mm wells.
Variants and codes
- Brand
- i-System — Short implant system
- Family
- Implants
- Type
- Short dental implants
- Category
- Implants
- Width
- 3.0 – 6.0 mm
- Height
- 4 – 10 mm
- Wells
- 2.0 · 2.5 · 3.0 mm
- Material
- Ti-6Al-4V ELI (ASTM F136)
Macro–micro design
- 01
1.5° locking conical connection
Precision fit of the abutment in the implant, designed to prevent micromovement and microleakage.
- 02
Sloping shoulder
Space for hard and soft tissue; safer next to a tooth or another implant.
- 03
Square-edged fins
Stress distribution to the alveolar bone and increased bone–implant contact.
- 04
Anti-rotational channels
Resist rotational forces and connect the vascularity of consecutive grooves.
- 05
Incrementally deepening grooves
Enhance the surface area and distribute functional load.
- 06
Biconical inner–outer body
Mechanical stability and stress distribution to surrounding hard tissue.
- 07
Safe apex
Flat apex for controlled insertion in the proximity of the mandibular nerve and the sinus membrane.
- 08
i-mimetic surface
Surface structure intended for osseointegration and cell attachment.
Fixture codes
Code format I-SF followed by width and height, with the well size in brackets (i-system catalog, index).
| Height | Ø3.0 | Ø3.5 |
|---|---|---|
| 6 mm | I-SF3006 (2) | I-SF3506 (2) |
| 8 mm | I-SF3008 (2) | I-SF3508 (2) |
| 10 mm | I-SF3010 (2) | I-SF3510 (2) |
| Height | Ø4.0 | Ø4.5 |
|---|---|---|
| 5 mm | I-SF4005 (2.5) | I-SF4505 (2.5) |
| 6 mm | I-SF4006 (2.5) | I-SF4506 (2.5) |
| 8 mm | I-SF4008 (2.5) | I-SF4508 (2.5) |
| 10 mm | I-SF4010 (2.5) | I-SF4510 (2.5) |
| Height | Ø4.0 | Ø4.5 | Ø5.0 | Ø5.5 | Ø6.0 |
|---|---|---|---|---|---|
| 4 mm | — | — | I-SF5004 (3) | I-SF5504 (3) | I-SF6004 (3) |
| 5 mm | — | I-SF4505 (3) | I-SF5005 (3) | I-SF5505 (3) | I-SF6005 (3) |
| 6 mm | I-SF4006 (3) | I-SF4506 (3) | I-SF5006 (3) | I-SF5506 (3) | I-SF6006 (3) |
| 8 mm | I-SF4008 (3) | I-SF4508 (3) | I-SF5008 (3) | I-SF5508 (3) | I-SF6008 (3) |
| 10 mm | I-SF4010 (3) | I-SF4510 (3) | I-SF5010 (3) | — | — |
Ø3.0 and Ø3.5 implants are recommended for lateral and mandibular incisors; 2.5 well implants in the anterior maxilla; 2 mm well implants are not for posterior single units or overdenture attachments.
Connection and well
The abutment post is friction-fit into the well of the implant — a 1.5° locking taper (“cold-weld”) that works without an abutment screw. The well size (2.0, 2.5 or 3.0 mm) follows the implant width and determines the matching abutment post; all abutments are non-indexed.
Range by well
2.0 well
Ø3.0 and Ø3.5 implants in 6, 8 and 10 mm; anterior single units.
- Ø3.0 · Ø3.5
- 6 · 8 · 10 mm
2.5 well
Ø4.0 and Ø4.5 implants in 5, 6, 8 and 10 mm; recommended in the anterior maxilla.
- Ø4.0 · Ø4.5
- 5 · 6 · 8 · 10 mm
3.0 well
Ø4.0 to Ø6.0 implants from 4 mm; the short range for posterior sites.
- Ø4.0 – Ø6.0
- 4 · 5 · 6 · 8 · 10 mm
Catalogs and documents
Documented compatibility
Only combinations stated in the product documentation are listed here; related products of the same brand are not assumed to be compatible.
- i-System prosthetic components →Abutment post size 2.0, 2.5 or 3.0 must match the implant well (catalog, prosthetic components).
- i-LiNQ® components →Shown by Novodent seated on the i-System implant (renders); both use a 1.5° locking conical connection.
